Burn Multiple
· 10 min read
Definition
Burn multiple is net cash burned divided by net new ARR over the same period, showing how many dollars a startup spends to add each dollar of new recurring revenue. Lower is better: under 2x is generally seen as decent, and under 1x is among the best.
How it comes up in fundraising
Investors use burn multiple as a first-screen efficiency metric: burning $3M to add $1M of net new ARR (a 3x multiple) signals an expensive growth engine that will need a clear explanation.
On this page
What is Burn Multiple?
Burn multiple answers one question: for every dollar of new annual recurring revenue a company adds, how many dollars of cash did it consume to get there? It is a capital-efficiency metric built for SaaS and other recurring-revenue businesses, and it is one of the first numbers investors check when they open a model.
The metric is commonly credited to David Sacks of Craft Ventures, who popularized it as a key SaaS measure. Its appeal is simplicity. Growth on its own says little about quality, because almost any company can grow if it spends enough. Burn multiple ties growth to its cost, so two companies adding the same ARR can look very different once you see what each one spent.
A lower number is better. A multiple of 1x means the company burned one dollar for each dollar of net new ARR. A multiple of 3x means it burned three.
What burn multiple is not
- It is not a profitability metric. A company can have a good burn multiple and still lose money for years.
- It is not a measure of total spend. That is burn rate.
- It is not a full picture of customer economics. It blends every cost line, from engineering to rent, into one figure.
How is Burn Multiple calculated?
The formula:
Burn Multiple = Net Burn / Net New ARR
Both parts must cover the same period. If you use a quarter of burn, use a quarter of ARR change. Mixing a monthly burn figure with a yearly ARR change produces a number that means nothing.
Net burn
Net burn is cash going out minus cash coming in from operations over the period. Leave out cash raised from investors or loans: that is financing, not operations. The simplest check is the change in your bank balance, adjusted to strip out any money raised. If you want a quick starting point, the burn rate calculator gives you the monthly figure to build from.
Net new ARR
Net new annual recurring revenue is ending ARR minus starting ARR. In practice it is built from:
- New ARR from new customers
- Plus expansion ARR from existing customers (upsells, seat growth, price increases)
- Minus churned and contracted ARR
Using net, not gross, is the point. If you add a lot of new business but lose much of it to cancellations, the metric should punish you, and it does.
Picking the period
Monthly figures are noisy. Most founders and investors look at quarterly or trailing twelve-month numbers, and many show the trend across several quarters. A single period tells you where you are; the trend tells an investor where you are heading.
How does Burn Multiple work?
Because the metric is a ratio, it moves when either side moves. Improving it comes down to two levers: spend less cash, or add more ARR with the cash you spend. Underneath those levers sit a few operating realities.
Gross margin
If it costs a lot to deliver your product, more of every revenue dollar is used up before it can fund growth. Kruze Consulting notes that SaaS companies with gross margin below about 80% find it harder to reach a good burn multiple. Delivery costs such as hosting, heavy onboarding or human-run services can pull margin down.
Churn
High churn attacks the denominator directly. Every dollar of ARR that leaves must be replaced before net new ARR can grow, so the company spends more just to stand still. Retention work can do as much for the multiple as extra sales hiring.
Sales cycle timing
Enterprise deals tend to be lumpy. One large contract can land in a quarter and make the multiple look excellent, then the next quarter looks poor because the pipeline did not close. This is why one period is a weak basis for judgement, and why investors ask for several.
Deliberate investment
Spending on R&D, new sales teams or brand pushes cash out today while the ARR arrives later. The burn multiple penalizes that timing gap. Some startups accept a higher multiple on purpose to grow faster. That can be a sound choice, but it needs a clear explanation.
What is a good Burn Multiple?
There is no single correct number, and benchmarks vary by source and stage. Treat the figures below as reference points, not pass marks.
| Benchmark source | Context | Figure |
|---|---|---|
| Kruze Consulting | General guide | Under 2x decent, under 1x best |
| Andreessen Horowitz | $0-$10M ARR | 3.8x bad, 1.6x OK, 1.1x good |
| FirstPageSage data (via Ratio) | Seed to late stage | About 1.5 at seed, falling to 0.85 late |
| CFO Advisors | Top quartile, $1M-$5M ARR | 1.5x to 2.5x |
A few patterns stand out:
- Early companies usually run higher multiples. Seed-stage businesses are still finding repeatable sales, and the multiple often improves by Series A or B as the company operates at scale.
- Very high multiples carry real risk. CFO Advisors reports that since 2022, startups that raised with burn multiples of 5x or higher have struggled to secure follow-on funding.
- Expectations tighten as you grow. A multiple an investor accepts at seed may raise questions at a later round.
Burn Multiple vs Burn Rate
These two get confused because they share a word. They answer different questions.
- Burn rate measures how fast cash leaves the business, usually per month. Combined with cash in the bank, it gives your runway.
- Burn multiple measures how efficiently that spent cash turns into new recurring revenue.
A company can have a low burn rate and a poor burn multiple: it spends little but adds almost no ARR. Another can have a high burn rate and a strong burn multiple: it spends heavily but adds ARR faster still. Investors look at both. Burn rate tells them about survival; burn multiple tells them whether more capital will produce growth.
Why does Burn Multiple matter to founders?
It is how investors read your spending
When an investor puts money in, they are effectively buying future ARR. Burn multiple is a direct read on the price of that ARR in your business. A high multiple suggests each new dollar of capital will buy less growth, which affects how much they are willing to fund and on what terms.
It forces honest internal decisions
Tracking the metric quarterly makes trade-offs visible. If a new sales hire adds cost for two quarters before closing deals, you can see the effect and decide whether the ramp is acceptable. It links hiring plans, pricing and retention work to one outcome.
It connects to unit economics
Burn multiple is a company-wide view. Your unit economics explain why it is what it is: what a customer costs to acquire, what they are worth over time, and how fast they pay back. If the burn multiple is weak, unit economics usually show where.
How do founders use Burn Multiple when raising?
Show the trend, not one quarter
Present the multiple across several quarters. An improving line from a higher number is often more persuasive than a single good quarter, especially if your sales are lumpy. If one quarter is unusually high or low, explain the deal timing behind it.
Defend deliberate spending
If your multiple sits above typical benchmarks because you are investing ahead of revenue, say so plainly and show what the spend is for. Be specific: which hires, which product bets, and when you expect them to show up in ARR. Founders should be ready to defend these growth investment choices. An unexplained high multiple reads as waste; an explained one reads as a plan.
Pair it with other metrics
Investors rarely judge on burn multiple alone. Show it next to retention, gross margin and the ratio of lifetime value to acquisition cost. Together they tell a coherent story about whether growth is durable.
Put the math where investors can check it
Keep a clean calculation in your data room: monthly burn, an ARR bridge (new, expansion, churn), and the resulting multiple by quarter. Investors will recompute it, so make sure your definitions are consistent from one period to the next. The Round Funded Data Room is free to build and share on every plan.
Target investors who understand your model
Recurring-revenue investors know the metric well and will ask about it early. If you are building a target list, a list of SaaS-focused investors is a sensible place to start, and preparing your burn multiple story before the first meeting saves time for both sides.
Common mistakes with Burn Multiple
- Mismatched periods. Quarterly burn divided by annual ARR change, or the reverse, gives a misleading figure.
- Using gross new ARR. Leaving churn out flatters the number. Investors will notice when they rebuild it.
- Counting financing as income. Money raised is not an operating inflow and should not reduce net burn.
- Counting non-recurring revenue as ARR. One-off services, setup fees and paid pilots are not recurring revenue.
- Judging from one period. Lumpy enterprise sales can swing the multiple sharply. Use quarterly or trailing figures and show the trend.
- Using it in isolation. The metric penalizes heavy R&D or sales investment, so on its own it can make a sensible plan look bad. Read it with retention, margin and LTV to CAC.
- Optimizing it at any cost. Cutting all growth spend can lower the multiple while stalling the company. The goal is efficient growth, not minimal burn.
Worked example
Hypothetical company: LedgerLoop, an invented B2B SaaS startup, reviewing one quarter.
Step 1: net burn for the quarter
- Cash at start of quarter: $10.0M
- Cash at end of quarter: $7.6M
- No new money raised during the quarter
- Net burn = $10.0M - $7.6M = $2.4M
Step 2: net new ARR for the same quarter
- New ARR from new customers: $1.9M
- Expansion ARR from existing customers: $0.3M
- Churned and contracted ARR: $0.6M
- Net new ARR = $1.9M + $0.3M - $0.6M = $1.6M
- Check: starting ARR $4.0M + $1.6M = ending ARR $5.6M
Step 3: burn multiple
- $2.4M / $1.6M = 1.5x
LedgerLoop spent $1.50 of cash for each $1 of net new ARR. That sits under the 2x level often called decent, but above the 1x level seen as best.
Step 4: what if churn improves?
Suppose a retention push cuts churned ARR from $0.6M to $0.2M with the same spend:
- Net new ARR = $1.9M + $0.3M - $0.2M = $2.0M
- Burn multiple = $2.4M / $2.0M = 1.2x
No extra sales spend, yet the multiple improves because less revenue needed replacing.
Frequently asked questions
What is burn multiple?
Burn multiple is a capital-efficiency metric for SaaS and recurring-revenue startups. It divides net cash burned by net new ARR over the same period, so it tells you how many dollars the company spent to add each dollar of new recurring revenue. A lower number is better. As a general guide, under 2x is considered decent and under 1x is among the best. It is often credited to David Sacks of Craft Ventures.
How does burn multiple work?
It works as a ratio, so it moves whenever spending or ARR growth changes. Burning more cash for the same ARR raises it; adding more ARR for the same cash lowers it. Net new ARR counts new and expansion revenue minus churn, so high churn pushes the multiple up. Low gross margins and lumpy enterprise deals also affect it, which is why investors prefer to see it over several quarters.
What is an example of burn multiple?
Say a company burns $1 million in a month and adds $3 million of net new ARR in that same month. Its burn multiple is $1M divided by $3M, or about 0.33. That means it spent roughly 33 cents for each dollar of new recurring revenue, which is very efficient. If the same company had burned $3 million to add $1 million of ARR, the multiple would be 3x.
Burn multiple for startups: what is a good number?
It depends on stage and source. Andreessen Horowitz benchmarks for companies with $0-$10M ARR rate 3.8x as bad, 1.6x as OK and 1.1x as good. FirstPageSage data puts acceptable levels around 1.5 at seed, falling to 0.85 at late stage. Seed companies usually run higher multiples that improve with scale, but raising with a multiple of 5x or more has made follow-on funding harder since 2022.
Burn multiple vs burn rate?
Burn rate measures how quickly a company spends cash, usually per month, and with your cash balance it tells you your runway. Burn multiple measures how efficiently that cash turns into new recurring revenue. A company can burn slowly but grow so little that its multiple is poor, or burn fast and still be efficient. Investors look at both: one for survival, one for growth quality.
Round Funded resources
Sources
- kruzeconsulting.com: Burn Multiple: Formula, Benchmarks & How to Improve It
- venasolutions.com: What Is It? How To Calculate? - Burn Multiple Formula
- cfoadvisors.com: Burn Multiple: What VCs Expect Before Series B (2025)
- ratiotech.com: Burn Multiple Explained: 5 Ways for SaaS CEOs To Reduce ...
Cite this term
Round Funded. "Burn Multiple." Startup Fundraising Glossary, reviewed November 3, 2026.
Stable URL, it will not change: https://www.roundfunded.com/en/glossary/burn-multiple
Related terms
Terms that come up alongside Burn Multiple in a fundraise.
- Burn RateBurn rate is the amount of cash a company spends per month above what it earns.
- Annual Recurring Revenue (ARR)ARR is the annualized value of a company’s recurring subscription revenue, excluding one-time fees and services.
- Unit EconomicsUnit economics are the revenues and costs of one unit of the business (a customer, order, or seat), revealing whether the model earns money at the atomic level.
Terms that mention Burn Multiple
Put this term to work
Definitions win negotiations only when you are in one. Find the investors who fund your stage and start the conversation.
Browse the investor database